Vicor recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a thermal relief pattern on the top layer to ensure good thermal conductivity. A minimum of 2 oz copper thickness is recommended.
To ensure reliable start-up, Vicor recommends a soft-start circuit to limit the inrush current, and a minimum input capacitance of 10uF to ensure stable operation.
The maximum allowed input voltage ripple is 10% of the nominal input voltage, with a maximum deviation of ±5% from the nominal input voltage.
Yes, the DCM3623T75H53C2T00 is rated for operation up to 100°C ambient temperature, but derating is required above 85°C. Consult the datasheet for derating curves.
Vicor recommends using an oscilloscope to monitor the input and output voltages, and checking for proper input voltage, output voltage, and current sense resistor values. Consult the datasheet for troubleshooting guidelines.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DCM3623T75H53C2T00 Overview
Use the download button to access the DCM3623T75H53C2T00 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DCM36,
or try a keyword search, such as Power Supply Modules
Suggested Parts
If you searched for DCM3623T75H53C2T00, you might also be interested in these parts:
