Vicor recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a thermal relief pattern on the top layer to ensure good thermal conductivity. A minimum of 2 oz copper thickness is recommended.
To ensure reliable start-up, Vicor recommends a soft-start circuit to limit the inrush current, and a minimum input capacitance of 10uF to ensure stable operation.
The maximum allowed input voltage ripple is 10% of the nominal input voltage, with a maximum deviation of ±5% from the nominal input voltage.
Yes, the DCM5614BD0H36K3T09 is rated for operation up to 125°C, but derating is required above 100°C. Consult the datasheet for derating curves and thermal management guidelines.
Vicor recommends using an oscilloscope to monitor the input and output voltages, and checking for proper PCB layout, component selection, and thermal management. Consult the datasheet and application notes for troubleshooting guidelines.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DCM5614BD0H36K3T09 Overview
Use the download button to access the DCM5614BD0H36K3T09 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DCM56,
or try a keyword search, such as Power Supply Modules
