Sanrex recommends a PCB layout with a minimum of 2oz copper thickness, a 1-inch square copper pad under the device, and multiple vias to the ground plane to ensure efficient heat dissipation.
Sanrex recommends applying a conformal coating to the device and ensuring the PCB is designed with a moisture-resistant finish. Additionally, the device should be stored in a dry, nitrogen-filled environment prior to installation.
The DD100KB160 can withstand surge currents up to 100A for 10ms, but it's recommended to implement additional surge protection measures, such as a TVS diode, to ensure the device's reliability.
Yes, the DD100KB160 can be used in a parallel configuration, but it's essential to ensure that the devices are matched in terms of electrical characteristics and that the PCB layout is designed to minimize current imbalance and thermal mismatch.
Sanrex recommends using a wedge-wedge bonding technique with a 1-mil aluminum wire and a bonding force of 30-40 grams to ensure reliable connections.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DD100KB160 Overview
Use the download button to access the DD100KB160 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DD100,
or try a keyword search, such as Rectifier Diodes
