A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Ensure a minimum of 1mm clearance around the device for airflow and heat dissipation.
Use a heat sink with a thermal resistance of ≤ 10°C/W, and ensure good airflow around the device. Also, consider derating the device's power handling at high temperatures.
The maximum allowed voltage on the enable pin (EN) is 6V. Exceeding this voltage may damage the device.
Yes, the DDZ9686-7 can be used in switching regulator applications. However, ensure the device is properly bypassed and decoupled to minimize noise and voltage spikes.
Use ESD protection devices, such as TVS diodes or ESD arrays, on the input and output lines to protect the DDZ9686-7 from electrostatic discharge.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DDZ9686-7 Overview
Use the download button to access the DDZ9686-7 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DDZ96,
or try a keyword search, such as Zener Diodes