The recommended operating voltage range for the DF04S2 is 1.65V to 5.5V.
To ensure proper power-on and power-off, it's recommended to follow a power-up sequence: VCC first, then VIN, and finally EN. For power-down, reverse the sequence.
The EN pin is an active-high enable input that allows the device to be enabled or disabled. When EN is high, the device is enabled, and when EN is low, the device is disabled.
To handle thermal considerations, ensure good thermal conductivity between the device and the PCB, use a heat sink if necessary, and avoid exceeding the maximum junction temperature (TJ) of 150°C.
The DF04S2 has a lower quiescent current (IQ) and a wider input voltage range compared to other similar devices from onsemi, making it suitable for battery-powered applications.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DF04S2 Overview
Use the download button to access the DF04S2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DF04S,
or try a keyword search, such as Bridge Rectifier Diodes