DFE201610E-2R2M=P2 - Murata Electronics

DFE201610E-2R2M=P2 Frequently Asked Questions (FAQs)

• What is the recommended land pattern for the DFE201610E-2R2M=P2?
  The recommended land pattern for the DFE201610E-2R2M=P2 can be found in the Murata datasheet or in the IPC-7351 standard. It is essential to follow the recommended land pattern to ensure reliable soldering and to prevent defects.
• How do I handle the DFE201610E-2R2M=P2 during the reflow soldering process?
  During reflow soldering, the DFE201610E-2R2M=P2 should be handled according to the recommended temperature profile provided in the datasheet. The component should be exposed to a peak temperature of 260°C for a maximum of 30 seconds. It is also essential to ensure that the component is not exposed to temperatures above 260°C or below 150°C for an extended period.
• What is the moisture sensitivity level (MSL) of the DFE201610E-2R2M=P2?
  The DFE201610E-2R2M=P2 has an MSL rating of 3, which means it can be exposed to a relative humidity of 60% at 30°C for 168 hours. It is essential to follow the recommended storage and handling procedures to prevent moisture-related defects.
• Can the DFE201610E-2R2M=P2 be used in high-frequency applications?
  Yes, the DFE201610E-2R2M=P2 is suitable for high-frequency applications due to its low equivalent series resistance (ESR) and high self-resonant frequency. However, it is essential to consider the component's impedance characteristics and ensure that it meets the specific requirements of the application.
• What is the recommended storage condition for the DFE201610E-2R2M=P2?
  The DFE201610E-2R2M=P2 should be stored in a dry, cool place with a relative humidity of 50% or less. The storage temperature should be between 10°C and 30°C. It is essential to follow the recommended storage conditions to prevent moisture-related defects and ensure the component's reliability.