DFE201610R-H-1R0M=P2 - Murata Electronics

DFE201610R-H-1R0M=P2 Frequently Asked Questions (FAQs)

• What is the recommended land pattern for this inductor?
  The recommended land pattern for the DFE201610R-H-1R0M=P2 can be found in the Murata datasheet or application notes. It typically includes a rectangular pad with a size of around 2.5mm x 1.5mm, with a 0.5mm hole in the center for the inductor's terminal.
• How do I handle the inductor's thermal considerations?
  The DFE201610R-H-1R0M=P2 has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal pad if the inductor is expected to operate near its maximum current rating.
• What is the inductor's self-resonant frequency (SRF)?
  The SRF of the DFE201610R-H-1R0M=P2 is not explicitly stated in the datasheet. However, it can be estimated using the inductor's inductance and capacitance values. As a rough estimate, the SRF is typically around 100-200 MHz for this inductor.
• Can I use this inductor in a high-frequency application?
  The DFE201610R-H-1R0M=P2 is suitable for high-frequency applications up to several hundred MHz. However, its performance may degrade at very high frequencies (e.g., above 1 GHz) due to the inductor's internal capacitance and resistance.
• How do I ensure the inductor's reliability and longevity?
  To ensure the reliability and longevity of the DFE201610R-H-1R0M=P2, follow proper storage and handling procedures, avoid exceeding the maximum ratings, and ensure good soldering and assembly practices.