DFE252012F-1R5M=P2 - Murata Electronics

DFE252012F-1R5M=P2 Frequently Asked Questions (FAQs)

• What is the recommended land pattern for this inductor?
  The recommended land pattern for the DFE252012F-1R5M=P2 inductor is a rectangular pad with a size of 2.5mm x 1.2mm, with a 0.5mm hole in the center for the inductor's terminal.
• How do I handle the inductor's thermal considerations?
  The DFE252012F-1R5M=P2 inductor has a maximum operating temperature of 125°C. Ensure good airflow around the inductor and avoid placing heat-generating components nearby. Use a thermal pad or heat sink if necessary.
• What is the inductor's self-resonant frequency?
  The self-resonant frequency of the DFE252012F-1R5M=P2 inductor is not specified in the datasheet, but it can be estimated to be around 100-200 MHz based on its inductance value and physical size.
• Can I use this inductor in a high-frequency application?
  The DFE252012F-1R5M=P2 inductor is suitable for high-frequency applications up to 100 MHz. However, its performance may degrade at higher frequencies due to its physical size and inductance value.
• How do I ensure the inductor's reliability in a high-reliability application?
  To ensure the reliability of the DFE252012F-1R5M=P2 inductor in a high-reliability application, follow proper storage and handling procedures, and ensure that the inductor is operated within its specified temperature and voltage ratings.