Please enter a minimum 3 letters or numbers
Technical Content
Part Image

DG201AAK - Analog Devices

Description: Quad SPST CMOS Analog Switches

Download DG201AAK Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
DG201AAK - Analog Devices - PCB symbol
click to zoom
PCB Footprints
DG201AAK - Analog Devices PCB footprint - Ceramic Dual-In-Line Packages - Ceramic Dual-In-Line Packages - CERDIP GLASS SEAL
click to zoom

DG201AAK Details

  • Manufacturer Part Number:

    DG201AAK

  • Brand Name:

    Analog Devices Inc

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-CERDIP-300_MIL

  • Package Description:

    0.300 INCH, CERAMIC, DIP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-CERDIP-300_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-05-28

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-GDIP-T16

  • JESD-609 Code:

    e0

  • Length:

    19.05 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -18 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NC

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    70 dB

  • On-state Resistance-Max (Ron):

    175 Ω

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -55 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    CERAMIC, GLASS-SEALED

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP16,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    240

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    5.08 mm

  • Signal Current-Max:

    0.02 A

  • Supply Current-Max (Isup):

    0.4 mA

  • Supply Voltage-Max (Vsup):

    18 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    NO

  • Switch-off Time-Max:

    450 ns

  • Switch-on Time-Max:

    600 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    MILITARY

  • Terminal Finish:

    Tin/Lead (Sn/Pb)

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    20

  • Width:

    7.62 mm

DG201AAK Frequently Asked Questions (FAQs)

  • A good PCB layout for the DG201AAK involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, use short traces and avoid routing digital signals near the analog inputs.
  • The DG201AAK requires a single 5V supply (VCC) and a separate analog ground (AGND). Ensure that the power supply is clean and well-regulated. Power sequencing is not critical, but it's recommended to power up the VCC before the analog signals to prevent latch-up.
  • The maximum allowable voltage on the analog input pins is 5.5V. To protect the inputs from overvoltage, use voltage-limiting resistors or clamping diodes, and consider adding external overvoltage protection circuits if necessary.
  • To configure the DG201AAK for bidirectional switching, connect the IN+ and IN- pins together and drive them with a single signal. In this mode, the device will switch in both directions. However, be aware that the device's internal resistance will be higher in the reverse direction, which may affect the overall performance.
  • The recommended operating temperature range for the DG201AAK is -40°C to +85°C. Temperature affects the device's performance, particularly the on-resistance (RDS(ON)), which increases with temperature. Ensure proper thermal management and consider the temperature coefficient when designing your application.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DG201AAK Overview

Use the download button to access the DG201AAK schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like DG201, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to DG201AAK

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

DG201AAK Alternates

Showing results

Image Part Number Model
Part Image DG201AAK/883 Temic Semiconductors

SPST, 4 Func, 1 Channel, CMOS, CDIP16
Part Image 7705301EA Intersil Corporation

SPST, 4 Func, 1 Channel, CMOS, CDIP16
Part Image DG201AAK/HR Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, CDIP16
Part Image DG201AAK Intersil Corporation

SPST, 4 Func, 1 Channel, CMOS, CDIP16
Part Image DG201AAK/883 Allegro MicroSystems LLC

SPST
For a full list of alternate parts for DG201AAK, check out Findchips.com