Part Image

DG408EUE+ - Analog Devices

Description: Maxim DG408EUE+, Multiplexer Single 8:1, 5 → 30 V, 16-Pin TSSOP

Download DG408EUE+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DG408EUE+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - U16-1
click to zoom
3D Models
DG408EUE+ - Analog Devices  - 3D model - Small Outline Packages - U16-1
click to zoom

DG408EUE+ Details

  • Manufacturer Part Number:

    DG408EUE+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-TSSOP_4.4-4.4_MM

  • Package Description:

    TSSOP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-TSSOP_4.4-4.4_MM

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-12-20

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SINGLE-ENDED MULTIPLEXER

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    75 dB

  • On-state Resistance Match-Nom:

    1.5 Ω

  • On-state Resistance-Max (Ron):

    100 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    COMMON OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    2 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    300 ns

  • Switch-on Time-Max:

    225 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4.4 mm

DG408EUE+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the DG408EUE+ should minimize parasitic inductance and capacitance. Keep the analog and digital grounds separate, and use a solid ground plane to reduce noise. Place the device close to the analog signal sources, and use short, direct traces to connect the signals to the device. Avoid running digital signals near the analog signals.
  • The DG408EUE+ requires a single 3.3V or 5V power supply. Use a low-ESR capacitor (e.g., 0.1uF) to decouple the power supply pins (VDD and VSS) to ground. Place the decoupling capacitor close to the device, and use a separate power plane for the analog and digital supplies if possible.
  • The DG408EUE+ can switch analog signals up to 250MHz. However, the actual frequency limit depends on the specific application, signal amplitude, and PCB layout. It's recommended to consult the datasheet and perform simulations or testing to determine the maximum frequency for a specific use case.
  • Charge injection can be minimized by using a low-resistance analog signal source, keeping the analog signal paths short, and using a low-capacitance PCB layout. Additionally, consider using a shielded cable or twisted pair wiring to connect the analog signals to the device.
  • The DG408EUE+ can be controlled using a 3-wire serial interface (SCL, SDA, and EN). Use a microcontroller with an I2C or SPI interface to control the device. Ensure the microcontroller's clock frequency is within the recommended range (100kHz to 400kHz) and use a pull-up resistor on the SDA line.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DG408EUE+ Overview

Use the download button to access the DG408EUE+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DG408, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to DG408EUE+

Showing 0 results

DG408EUE+ Alternates

Showing results

Image Part Number Model
Part Image DG408EUE+ Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

Part Image DG408CUE+ Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

Part Image DG408DVZ Intersil Corporation

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

Part Image DG408DVZ-T Intersil Corporation

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

Part Image DG408EUE Maxim Integrated Products

Single-Ended Multiplexer, 1 Func, 8 Channel, CMOS, PDSO16

For a full list of alternate parts for DG408EUE+, check out Findchips.com