Part Image

DG411DJZ - Renesas Electronics

Description: The DG411 series monolithic CMOS analog switches are drop-in replacements for the popular DG211 and DG212 series devices. They include four independent single pole throw (SPST) analog switches, and TTL and CMOS compatible digital inputs. These switches feature lower analog ON-resistance (

Download DG411DJZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DG411DJZ - Renesas Electronics PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - E16.3-ren1
click to zoom
3D Models
DG411DJZ - Renesas Electronics  - 3D model - Dual-In-Line Packages - E16.3-ren1
click to zoom

DG411DJZ Details

  • Manufacturer Part Number:

    DG411DJZ

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    PDIP

  • Package Description:

    DIP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    E16.3

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    18 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDIP-T16

  • JESD-609 Code:

    e3

  • Length:

    19.17 mm

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    68 dB

  • On-state Resistance-Max (Ron):

    45 Ω

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP16,.3

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    5.33 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.005 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    NO

  • Switch-off Time-Max:

    160 ns

  • Switch-on Time-Max:

    220 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Width:

    7.62 mm

DG411DJZ Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate analog ground plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a 10nF capacitor between the VCC and GND pins to filter out noise.
  • Use a high-quality, low-ESR capacitor (e.g., 10uF ceramic) between VCC and GND, and a 100nF capacitor between VCC and AVCC. Ensure the power supply is stable and has low ripple. Use a ferrite bead or a 10Ω resistor in series with the power supply to reduce noise.
  • The recommended clock frequency is 16MHz. Use a 16MHz crystal oscillator with a load capacitance of 18pF and a series resistance of 1kΩ. Ensure the oscillator is properly decoupled with a 10nF capacitor between the XTAL1 and XTAL2 pins.
  • Use the Power-Down mode (PD) to reduce power consumption. Set the PD bit in the Power Management Control Register (PMC) to 1. You can also use the Idle mode (IDLE) to reduce power consumption when the CPU is not active.
  • Use a logic analyzer or an oscilloscope to monitor the signals. Enable the JTAG interface and use a debugger like Renesas' E1 or a third-party tool like Segger J-Link. Use the on-chip debug module (OCD) to set breakpoints and inspect registers.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DG411DJZ Overview

Use the download button to access the DG411DJZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DG411, or try a keyword search, such as Multiplexers or Switches

Parts related to DG411DJZ

Showing 0 results

DG411DJZ Alternates

Showing results

Image Part Number Model
Part Image DG411DJ+ Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDIP16

Part Image DG411AK/883 Rochester Electronics LLC

QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, CDIP16

Part Image DG411DJ Vishay Siliconix

SPST, 4 Func, CMOS, PDIP16

Part Image DG411AK/883 Intersil Corporation

SPST, 4 Func, 1 Channel, CMOS, CDIP16

Part Image DG411DJ-E3 Vishay Siliconix

SPST, 4 Func, 1 Channel, CMOS, PDIP16

For a full list of alternate parts for DG411DJZ, check out Findchips.com