Part Image

DG412CUE+T - Analog Devices

Description: 4 Circuit IC Switch 1:1 45Ohm 16-TSSOP

Download DG412CUE+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DG412CUE+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - U16+2
click to zoom
3D Models
DG412CUE+T - Analog Devices  - 3D model - Small Outline Packages - U16+2
click to zoom

DG412CUE+T Details

  • Manufacturer Part Number:

    DG412CUE+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-TSSOP_4.4-4.4_MM

  • Package Description:

    TSSOP, TSSOP16,.25

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-TSSOP_4.4-4.4_MM

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-12-20

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    68 dB

  • On-state Resistance Match-Nom:

    3 Ω

  • On-state Resistance-Max (Ron):

    45 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.005 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    145 ns

  • Switch-on Time-Max:

    175 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4.4 mm

DG412CUE+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the DG412CUE+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, use short traces and avoid crossing digital and analog signals.
  • Use a low-impedance power source, and decouple the VDD and VSS pins with 0.1 μF and 10 μF capacitors, respectively. Place the capacitors as close to the device as possible, and use a separate analog power plane to minimize noise.
  • The DG412CUE+T can operate up to 100 MHz, but the maximum frequency depends on the specific application and signal conditions. Higher frequencies can lead to increased power consumption, reduced signal-to-noise ratio, and decreased accuracy.
  • Use a microcontroller or a dedicated programming interface to access the DG412CUE+T's internal registers. The recommended settings depend on the specific application, but typical settings include configuring the analog-to-digital converter (ADC), setting the gain and offset, and enabling/disabling internal buffers.
  • The DG412CUE+T has a maximum junction temperature of 150°C. Ensure reliable operation by providing adequate heat sinking, using a thermally conductive PCB material, and minimizing power consumption. In high-temperature environments, consider using a heat sink or a thermoelectric cooler.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DG412CUE+T Overview

Use the download button to access the DG412CUE+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DG412, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to DG412CUE+T

Showing 0 results

DG412CUE+T Alternates

Showing results

Image Part Number Model
Part Image DG412CUE+ Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG412CUE+T Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG412EUE+T Maxim Integrated Products

SPST, 4 Func, PDSO16

Part Image DG412CUE Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG412EUE Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

For a full list of alternate parts for DG412CUE+T, check out Findchips.com