Part Image

DG413CUE+ - Analog Devices

Description: ♦ Plug-In Upgrade for Industry-Standard DG411/DG412/DG413 ♦ Improved RDS(ON) Match Between Channels (3Ω max) ♦ Guaranteed RFLAT(ON) Over Signal Range (Δ4Ω) ♦ Improved Charge Injection (10pC max) ♦ Improved Off-Leakage Current Over Temperature (< 5nA at +85°C)

Download DG413CUE+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DG413CUE+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - TSSOP16
click to zoom
3D Models
DG413CUE+ - Analog Devices  - 3D model - Small Outline Packages - TSSOP16
click to zoom

DG413CUE+ Details

  • Manufacturer Part Number:

    DG413CUE+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-TSSOP_4.4-4.4_MM

  • Package Description:

    4.40 MM, MO-153AB, TSSOP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-TSSOP_4.4-4.4_MM

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-12-20

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    5 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NO/NC

  • Number of Channels:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Off-state Isolation-Nom:

    68 dB

  • On-state Resistance Match-Nom:

    3 Ω

  • On-state Resistance-Max (Ron):

    45 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.005 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    145 ns

  • Switch-on Time-Max:

    175 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    4.4 mm

DG413CUE+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the DG413CUE+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, use short traces and avoid crossing digital and analog signals.
  • Use a low-impedance power source, and decouple the VCC and VDD pins with 0.1 μF and 10 μF capacitors, respectively. Place the capacitors as close to the device as possible, and use a 10 Ω resistor in series with the VCC pin to prevent voltage overshoot.
  • The maximum allowable voltage on the analog input pins is VCC + 0.3 V, but it's recommended to keep the input voltage within the specified range of 0 V to VCC to ensure accurate switching and prevent damage to the device.
  • The DG413CUE+ can be programmed using a 3-wire serial interface (SCL, SDA, and CS). Use a microcontroller or a dedicated IC to send the required commands and data to the device to configure the switch settings.
  • The typical turn-on and turn-off time for the DG413CUE+ switches is around 20 ns to 50 ns, depending on the specific configuration and operating conditions.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DG413CUE+ Overview

Use the download button to access the DG413CUE+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DG413, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to DG413CUE+

Showing 0 results

DG413CUE+ Alternates

Showing results

Image Part Number Model
Part Image DG413CUE+T Analog Devices Inc

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG413EUE Rochester Electronics LLC

QUAD 1-CHANNEL, SGL POLE SGL THROW SWITCH, PDSO16, 4.40 MM, 0.65 MM PITCH, TSSOP-16

Part Image DG413CUE+T Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG413CUE+ Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

Part Image DG413CUE Maxim Integrated Products

SPST, 4 Func, 1 Channel, CMOS, PDSO16

For a full list of alternate parts for DG413CUE+, check out Findchips.com