Part Image

DG417CY+T - Analog Devices

Description: Improved, SPST/SPDT Analog Switches

Download DG417CY+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DG417CY+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8SO
click to zoom
3D Models
DG417CY+T - Analog Devices  - 3D model - Small Outline Packages - 8SO
click to zoom

DG417CY+T Details

  • Manufacturer Part Number:

    DG417CY+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SOP, SOP8,.25

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1999-05-28

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Analog IC - Other Type:

    SPST

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage-Max (Vsup):

    -20 V

  • Neg Supply Voltage-Min (Vsup):

    -4.5 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Normal Position:

    NC

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Off-state Isolation-Nom:

    68 dB

  • On-state Resistance Match-Nom:

    3 Ω

  • On-state Resistance-Max (Ron):

    35 Ω

  • Operating Temperature-Max:

    70 °C

  • Output:

    SEPARATE OUTPUT

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Signal Current-Max:

    0.03 A

  • Supply Current-Max (Isup):

    0.0005 mA

  • Supply Voltage-Max (Vsup):

    20 V

  • Supply Voltage-Min (Vsup):

    4.5 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Switch-off Time-Max:

    145 ns

  • Switch-on Time-Max:

    175 ns

  • Switching:

    BREAK-BEFORE-MAKE

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

DG417CY+T Frequently Asked Questions (FAQs)

  • A good PCB layout practice is to keep the analog and digital grounds separate, use a solid ground plane, and keep the signal traces short and away from the switching nodes. A 4-layer PCB with a dedicated ground layer is recommended. Additionally, place the DG411CY+T near the analog signal sources and keep the digital signals away from the analog signal degradation.
  • Use a low-ESR capacitor (e.g., 100nF) between VCC and GND, and another capacitor (e.g., 10uF) between VCC and GND, as close to the DG411CY+T as possible. Ensure the power supply is clean and regulated, and use a ferrite bead or a pi-filter to filter out high-frequency noise.
  • The DG411CY+T is specified to operate up to 100 kHz, but it can be used at higher frequencies (up to 1 MHz) with some performance degradation. However, it's essential to consider the signal bandwidth, noise, and settling time when operating at higher frequencies.
  • During power-up, ensure the EN pin is low until the power supply is stable and the DG411CY+T is fully powered down before bringing the EN pin high. During power-down, bring the EN pin low before powering down the device. This ensures proper operation and prevents unwanted switching.
  • Drive the control inputs with a low-impedance source, and use a voltage divider or a level shifter if necessary. Ensure the logic levels are compatible with the DG411CY+T's input threshold (typically 0.8V for logic high and 0.2V for logic low). Use a pull-down resistor (e.g., 1kΩ) to prevent floating inputs.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DG417CY+T Overview

Use the download button to access the DG417CY+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DG417, or try a keyword search, such as Multiplexers or Switches

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to DG417CY+T

Showing 0 results

DG417CY+T Alternates

Showing results

Image Part Number Model
Part Image DG417DY-E3 Vishay Intertechnologies

SPST

Part Image DG417DY-T1 Temic Semiconductors

SPST, 1 Func, 1 Channel, CMOS, PDSO8

Part Image DG417DY+T Maxim Integrated Products

SPST, 1 Func, 1 Channel, CMOS, PDSO8

Part Image DG417DY Maxim Integrated Products

SPST, 1 Func, 1 Channel, CMOS, PDSO8

Part Image DG417CY Maxim Integrated Products

SPST, 1 Func, 1 Channel, CMOS, PDSO8

For a full list of alternate parts for DG417CY+T, check out Findchips.com