Please enter a minimum 3 letters or numbers
Technical Content
Part Image

DLFCG-540+ - Mini-Circuits

Description: Signal Conditioning LTCC Differential Low Pass Filter, DC - 540 MHz

Download DLFCG-540+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
DLFCG-540+ - Mini-Circuits - PCB symbol
click to zoom
PCB Footprints
DLFCG-540+ - Mini-Circuits PCB footprint - Other - Other - GE0805C-1_2023
click to zoom
3D Models
DLFCG-540+ - Mini-Circuits - 3D model - Other - GE0805C-1_2023
click to zoom

DLFCG-540+ Details

  • Manufacturer Part Number:

    DLFCG-540+

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    EIA STANDARD PACKAGE 0805, LTCC, 6 PIN

  • ECCN Code:

    EAR99

  • Manufacturer:

    Mini-Circuits

  • YTEOL:

    7.24

  • Average Input Power:

    1 W

  • Center or Cutoff Frequency (fo/fc):

    590 MHz

  • Filter Type:

    CERAMIC LPF

  • Height:

    0.84 mm

  • Input/Output Impedance:

    100 OHM

  • Insertion Loss-Max:

    2.2 dB

  • Length:

    2.01 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Sections-Max:

    1

  • Number of Sections-Min:

    1

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • VSWR:

    1.2

  • Width:

    1.24 mm

DLFCG-540+ Frequently Asked Questions (FAQs)

  • Mini-Circuits recommends a 4-layer PCB with a solid ground plane, and to keep the signal traces as short as possible. A good layout practice is to use a microstrip line with a 50 ohm impedance, and to place the LNA close to the antenna or signal source.
  • The DLFCG-540+ requires a positive voltage supply (Vdd) of 3.3V to 5V, and a current of 35mA to 40mA. A voltage regulator or a bias tee can be used to provide the required bias voltage and current.
  • The maximum input power that the DLFCG-540+ can handle is -10 dBm. Exceeding this power may cause compression or damage to the device.
  • The DLFCG-540+ is rated for operation up to 85°C. However, the device's performance may degrade at higher temperatures, and the noise figure may increase. It's recommended to derate the device's performance at high temperatures.
  • The DLFCG-540+ has an input impedance of 50 ohms, and an output impedance of 50 ohms. A conjugate match can be used to match the input and output impedance to the system's impedance, typically 50 ohms.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DLFCG-540+ Overview

Use the download button to access the DLFCG-540+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DLFCG, or try a keyword search, such as Ceramic Filters

About Mini-Circuits

Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.

Parts related to DLFCG-540+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑