Part Image

dsPIC33CK32MP102-E/2N - Microchip

Description: Digital Signal Processors & Controllers - DSP, DSC 16 Bit DSC, Single Core, 32K Flash, 8K RAM, 100MHz, 28Pin , E-temp

Download dsPIC33CK32MP102-E/2N Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
dsPIC33CK32MP102-E/2N - Microchip PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - qfn28
click to zoom
3D Models
dsPIC33CK32MP102-E/2N - Microchip  - 3D model - Quad Flat No-Lead - qfn28
click to zoom

dsPIC33CK32MP102-E/2N Details

  • Manufacturer Part Number:

    DSPIC33CK32MP102-E/2N

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    UQFN-28

  • Pin Count:

    28

  • Manufacturer Package Code:

    UQFN-28

  • Country Of Origin:

    Thailand

  • ECCN Code:

    3A991.A.2

  • HTS Code:

    8542.31.00.01

  • Factory Lead Time:

    7 Weeks

  • Manufacturer:

    Microchip Technology Inc

  • YTEOL:

    18

  • Barrel Shifter:

    YES

  • Bit Size:

    16

  • Boundary Scan:

    YES

  • Clock Frequency-Max:

    64 MHz

  • Format:

    FIXED POINT

  • Integrated Cache:

    NO

  • Internal Bus Architecture:

    MULTIPLE

  • JESD-30 Code:

    S-PQCC-N28

  • JESD-609 Code:

    e3

  • Length:

    6 mm

  • Low Power Mode:

    YES

  • Number of DMA Channels:

    4

  • Number of External Interrupts:

    4

  • Number of Serial I/Os:

    3

  • Number of Terminals:

    28

  • Number of Timers:

    4

  • On Chip Data RAM Width:

    8

  • On Chip Program ROM Width:

    24

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC28,.24SQ,25

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • RAM (words):

    8192

  • ROM Programmability:

    FLASH

  • Screening Level:

    AEC-Q100; TS 16949

  • Seated Height-Max:

    0.55 mm

  • Supply Current-Max:

    35 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    QUAD

  • Width:

    6 mm

  • uPs/uCs/Peripheral ICs Type:

    DIGITAL SIGNAL PROCESSOR, CONTROLLER

dsPIC33CK32MP102-E/2N Frequently Asked Questions (FAQs)

  • The maximum clock frequency that can be achieved with an external crystal oscillator is 100 MHz. However, the device can operate up to 120 MHz with a PLL clock source.
  • To configure the device for low power consumption, you can use the Power-Saving Modes (PSM) feature, which includes Sleep, Idle, and Doze modes. You can also use the Peripheral Module Disable (PMD) feature to disable unused peripherals, and adjust the clock frequency and voltage to minimize power consumption.
  • Yes, the DSPIC33CK32MP102-E/2N has an external memory interface that allows you to connect external memory devices, such as flash memory or SRAM, to the device. The device supports up to 16-bit wide external memory interfaces.
  • The DSPIC33CK32MP102-E/2N has a built-in watchdog timer (WDT) that can be enabled and configured using the WDTCON register. You can set the watchdog timer period, enable or disable the watchdog timer, and configure the watchdog timer to reset the device or generate an interrupt when it times out.
  • The maximum amount of current that can be sourced or sunk by the GPIO pins is 25 mA per pin. However, the total current sourced or sunk by all GPIO pins should not exceed 200 mA.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

dsPIC33CK32MP102-E/2N Overview

Use the download button to access the dsPIC33CK32MP102-E/2N schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like dsPIC, or try a keyword search, such as Digital Signal Processors

About Microchip

Microchip Technology Inc. is a leading manufacturer of microcontrollers and semiconductor devices for a wide range of applications in the aerospace, automotive, consumer electronics, industrial, and medical industries. Alongside a comprehensive product portfolio, Microchip Technology Inc. also provides easy-to-use development tools that enable engineers to create optimal designs quickly with minimal iterations to reduce risk while lowering total system costs to market. Headquartered in Chandler, Arizona, th

Parts related to dsPIC33CK32MP102-E/2N

Showing 0 results

dsPIC33CK32MP102-E/2N Alternates

Showing results

Image Part Number Model
Part Image DSPIC33CK32MP102-I/2N Microchip Technology Inc

16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PQCC28

Part Image DSPIC33CK32MP102-H/2N Microchip Technology Inc

16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PQCC28

Part Image DSPIC33CK32MP102T-I/2N Microchip Technology Inc

16-Bit Size, 0-Ext Bit, 64MHz, CMOS, PQCC28

Part Image DSPIC33CK32MP102T-E/2N Microchip Technology Inc

dsPIC33C 100MHz, 32K Flash, 8K RAM, OpAmps, 12bit ADCs, PWM