A good PCB layout for the DXT13003DG-13 should include a solid ground plane, wide power traces, and a thermal relief pattern under the device to facilitate heat dissipation. A minimum of 2oz copper thickness is recommended.
To ensure proper biasing, connect the input voltage (VIN) to a stable DC power source, and decouple it with a 10uF capacitor. The enable pin (EN) should be tied to VIN or a digital signal with a pull-up resistor. The output voltage (VOUT) should be decoupled with a 10uF capacitor as well.
The DXT13003DG-13 is rated for operation up to 85°C ambient temperature. However, for reliable operation, it's recommended to keep the ambient temperature below 70°C to ensure a junction temperature below 125°C.
While the DXT13003DG-13 is a robust device, it's not designed for extreme vibration environments. If your application involves high vibration, consider adding mechanical dampening or using a vibration-resistant mounting method to ensure reliable operation.
First, verify the input voltage and enable pin connections. Check for proper decoupling and a stable input voltage. If issues persist, verify the output voltage with a scope or multimeter, and check for any signs of overheating or physical damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DXT13003DG-13 Overview
Use the download button to access the DXT13003DG-13 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DXT13,
or try a keyword search, such as Power Bipolar Transistors
Suggested Parts
If you searched for DXT13003DG-13, you might also be interested in these parts:
