The recommended wire size is 0.3mm to 0.5mm in diameter, and the insulation should be heat-resistant and have a minimum temperature rating of 150°C.
To ensure accurate temperature measurement, the E-103 should be installed in a location that is representative of the temperature being measured, and the thermistor should be in good thermal contact with the surface being measured. Additionally, the measurement circuit should be designed to minimize noise and electromagnetic interference.
The maximum power rating for the E-103 is 10mW, and it is recommended to keep the power dissipation below 5mW to ensure accurate and reliable operation.
The E-103 is designed to operate in a wide range of temperatures (-40°C to 150°C) and humidity levels, but it is recommended to take precautions to prevent moisture ingress and to ensure good thermal contact with the surface being measured.
The E-103 can be calibrated using a thermistor calibration curve or by using a calibration resistor. It is recommended to consult the datasheet and application notes for specific calibration procedures.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
E-103 Overview
Use the download button to access the E-103 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Visible LEDs
