The recommended wire size is 0.3mm to 0.5mm in diameter, and the insulation should be heat-resistant and have a minimum temperature rating of 150°C.
To ensure accurate temperature measurement, the E-153 should be installed in a location that is representative of the temperature being measured, and the thermistor should be in good thermal contact with the surface being measured. Additionally, the measurement circuit should be designed to minimize noise and electromagnetic interference.
The E-153 is not recommended for use in high-humidity environments, as it is not hermetically sealed and may be susceptible to moisture ingress. If high humidity is a concern, a thermistor with a hermetic seal or a waterproof coating should be considered.
The maximum power rating for the E-153 is 10mW. Exceeding this power rating can cause the thermistor to overheat and affect its accuracy and reliability.
The E-153 is rated for use up to 150°C, but it can be used for higher temperature applications with proper derating. However, it is not recommended for use above 180°C, as the thermistor's accuracy and reliability may be compromised.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
E-153 Overview
Use the download button to access the E-153 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Visible LEDs
