For optimal performance, it's recommended to follow Ohmite's application notes for PCB layout and thermal management. This includes using a thermal pad on the bottom of the device, keeping the PCB traces short and wide, and using a heat sink if necessary.
The EBWA-NR0020FET is designed to handle high-frequency switching, but it's essential to follow proper PCB layout and design practices to minimize EMI. This includes using a low-ESR capacitor, keeping the switching node short, and using a shielded cable or twisted pair for the gate drive.
The maximum allowed voltage for the gate-source and gate-drain pins is ±20V, but it's recommended to keep the voltage within ±15V to ensure reliable operation and prevent damage to the device.
During startup and shutdown, the EBWA-NR0020FET may exhibit some overshoot or undershoot due to the internal gate-source voltage. It's essential to ensure that the system design can handle these transients and provide adequate filtering or protection if necessary.
The recommended gate drive voltage is typically between 10V to 15V, and the current should be limited to 1A to 2A to prevent overheating and ensure reliable operation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EBWA-NR0020FET Overview
Use the download button to access the EBWA-NR0020FET schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like EBWA-,
or try a keyword search, such as Fixed Resistors
