Part Image

EDSTL950/5 - On Shore Technology Inc.

Description: 5 Position Terminal Block Header, Male Pins, Shrouded (4 Side) 0.197" (5.00mm) 90°, Right Angle Solder

Download EDSTL950/5 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
EDSTL950/5 - On Shore Technology Inc.  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

EDSTL950/5 Details

  • Manufacturer Part Number:

    EDSTL950/5

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Mainland China, Tunisia

  • ECCN Code:

    EAR99

  • HTS Code:

    8536.90.40.00

  • Manufacturer:

    On-Shore Technology Inc

  • YTEOL:

    8

  • Additional Feature:

    STANDARD: UL 94V-0; POLYAMIDE/PBT-POLYESTER

  • Fastening Method:

    CONNECTOR

  • Mounting Type:

    BOARD

  • Number of Decks:

    1

  • Number of Rows:

    1

  • Number of Ways:

    5

  • Rated Current:

    15 A

  • Rated Voltage:

    300 V

  • Safety Approval:

    CUL; UL; VDE

  • Terminal Gender:

    MALE

  • Terminal and Terminal Block Type:

    STRIP TERMINAL BLOCK

EDSTL950/5 Frequently Asked Questions (FAQs)

  • On-Shore Technology Inc recommends a 4-layer PCB with a dedicated thermal layer, and a thermal pad size of at least 10mm x 10mm. Additionally, a thermal interface material (TIM) with a thermal conductivity of at least 1 W/m-K is recommended to ensure efficient heat dissipation.
  • The EDSTL950/5 has built-in overvoltage protection (OVP) and undervoltage protection (UVP) circuits. The OVP threshold is set at 5.5V, and the UVP threshold is set at 4.5V. When an overvoltage or undervoltage condition is detected, the device will automatically shut down to prevent damage.
  • On-Shore Technology Inc recommends using a high-quality, low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of at least 6.3V. This will help to filter out noise and ensure stable operation.
  • The EDSTL950/5 is rated for operation up to 125°C, but the maximum junction temperature (Tj) should not exceed 150°C. Above 125°C, the device's performance and reliability may be compromised. It's essential to ensure proper thermal management and cooling to maintain a safe operating temperature.
  • The typical start-up time for the EDSTL950/5 is around 10ms, and the settling time is around 50ms. However, these times may vary depending on the specific application, input voltage, and output load.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

EDSTL950/5 Overview

Use the download button to access the EDSTL950/5 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like EDSTL, or try a keyword search, such as Terminals and Terminal Blocks

Parts related to EDSTL950/5

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview