ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating curves in the datasheet for operation above 85°C. Additionally, ensure good thermal design, and consider using a heat sink or thermal interface material if necessary.
The maximum allowed voltage on the enable pin (EN) is 6V, which is the same as the maximum input voltage of the device (VIN). Exceeding this voltage may damage the device.
Yes, the EDZTE6136B can be used in switching regulator applications. However, ensure that the device is properly bypassed and decoupled to minimize noise and voltage spikes.
Power dissipation can be calculated using the formula: Pd = (VIN - VOUT) x IOUT x Efficiency. Refer to the datasheet for efficiency curves and thermal resistance values.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EDZTE6136B Overview
Use the download button to access the EDZTE6136B schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EDZTE,
or try a keyword search, such as Zener Diodes
