Part Image

EL5167IWZ-T7A - Renesas Electronics

Description: The EL5166 and EL5167 amplifiers are of the current feedback variety and exhibit a very high bandwidth of 1.4GHz at AV = +1 and 800MHz at AV = +2. This makes these amplifiers ideal for today's High-Speed video and monitor applications, as well as a number of RF and IF frequency designs. With a supply current of just 8. 5mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers offer very high performance for little power consumption. The EL5166 also incorporates an enable and d

Download EL5167IWZ-T7A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
EL5167IWZ-T7A - Renesas Electronics PCB footprint - SOT23 (5-Pin) - SOT23 (5-Pin) - 5 Ld SOT-23-
click to zoom
3D Models
EL5167IWZ-T7A - Renesas Electronics  - 3D model - SOT23 (5-Pin) - 5 Ld SOT-23-
click to zoom

EL5167IWZ-T7A Details

  • Manufacturer Part Number:

    EL5167IWZ-T7A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOT23

  • Package Description:

    SC-70, 5 PIN

  • Pin Count:

    5

  • Manufacturer Package Code:

    P5.064C

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Factory Lead Time:

    4 Weeks

  • Date Of Intro:

    2017-10-03

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    8.5 µA

  • Common-mode Reject Ratio-Min:

    52 dB

  • Common-mode Reject Ratio-Nom:

    57 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    5000 µV

  • JESD-30 Code:

    R-PDSO-G5

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    2

  • Neg Supply Voltage Limit-Max:

    -6.3 V

  • Neg Supply Voltage-Nom (Vsup):

    -5 V

  • Number of Functions:

    1

  • Number of Terminals:

    5

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP5/6,.08

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR, 7 INCH

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Min:

    4000 V/us

  • Slew Rate-Nom:

    6000 V/us

  • Supply Current-Max:

    9.3 mA

  • Supply Voltage Limit-Max:

    6.3 V

  • Supply Voltage-Nom (Vsup):

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Wideband:

    YES

  • Width:

    1.25 mm

EL5167IWZ-T7A Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and thermal vias is recommended. Ensure that the thermal pad is connected to a large copper area to dissipate heat efficiently.
  • Use a decoupling capacitor of at least 10uF between VCC and GND, and ensure that the input voltage is within the recommended range. Also, avoid exceeding the maximum junction temperature (Tj) of 150°C.
  • Use a pi-filter configuration with a series inductor (e.g., 1uH) and a shunt capacitor (e.g., 10nF) to minimize EMI. Ensure that the filter components are placed close to the device.
  • Check the input voltage, output load, and feedback resistors for correctness. Verify that the output voltage is within the specified range and that the device is not overheating. Use an oscilloscope to check for oscillations or noise on the output.
  • Use a shielded enclosure, ensure good PCB layout practices, and use EMI filters or common-mode chokes as needed. Also, follow the recommended layout and grounding guidelines to minimize radiation and susceptibility.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

EL5167IWZ-T7A Overview

Use the download button to access the EL5167IWZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EL516, or try a keyword search, such as Operational Amplifiers

Parts related to EL5167IWZ-T7A

Showing 0 results