EM14R0D-R20-L064S - Bourns

EM14R0D-R20-L064S Frequently Asked Questions (FAQs)

• What is the recommended torque for mounting the encoder?
  The recommended torque for mounting the EM14R0D-R20-L064S is 0.5-1.5 Nm (4.4-13.3 in-lbs). Over-tightening can damage the encoder.
• How do I handle EMI and RFI interference with this encoder?
  To minimize EMI and RFI interference, use shielded cables, keep the encoder away from high-frequency sources, and consider adding a ferrite bead or common-mode choke to the signal lines.
• What is the maximum allowable vibration for this encoder?
  The EM14R0D-R20-L064S can withstand vibrations up to 10 G (98 m/s²) in the frequency range of 10-2000 Hz.
• Can I use this encoder in a humid or wet environment?
  The EM14R0D-R20-L064S has an IP64 rating, which means it can withstand dust and water splashes, but it's not suitable for immersion or prolonged exposure to high humidity.
• How do I debounce the encoder output signals?
  You can debounce the encoder output signals using a simple RC filter or a dedicated debouncing IC, such as the 74HC123. The recommended debouncing time is 1-10 ms.