Please enter a minimum 3 letters or numbers
Technical Content
Part Image

EMI8041MUTAG - onsemi

Description: Total Insertion Loss < 2.5dB at 2.5GHz; Large Differential Mode Cutoff Frequency > 5GHz; High Common Mode Stop Band Attenuation > 10dB at 500MHz, 15dB at 700MHz; Low Channel Resistance 6.0 Ω ; Provides ESD Protection to IEC61000-4-2 Level 4, +/-15kV Contact; SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable; These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

Download EMI8041MUTAG Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
EMI8041MUTAG - onsemi - PCB symbol
click to zoom
PCB Footprints
EMI8041MUTAG - onsemi PCB footprint - Other - Other - CASE 711AY ISSUE O
click to zoom
3D Models
EMI8041MUTAG - onsemi - 3D model - Other - CASE 711AY ISSUE O
click to zoom

EMI8041MUTAG Details

  • Manufacturer Part Number:

    EMI8041MUTAG

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    XDFN-6

  • Manufacturer Package Code:

    711AY

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8504.50.80.00

  • Manufacturer:

    onsemi

  • YTEOL:

    7.59

  • Filter Type:

    DATA LINE FILTER

  • JESD-609 Code:

    e4

  • Mounting Type:

    SURFACE MOUNT

  • Number of Functions:

    2

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Impedance:

    50 OHM Ω

  • Package Material:

    PLASTIC

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

EMI8041MUTAG Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the EMI8041MUTAG close to the antenna and use a short, direct connection to minimize radiation.
  • Use a thermal pad or thermal tape to attach the device to a heat sink or a metal plate. Ensure good airflow around the device and avoid blocking the thermal pads.
  • The maximum allowable voltage on the VCC pin is 3.6V. Exceeding this voltage may damage the device.
  • Use a spectrum analyzer to measure the EMI radiation. Check the PCB layout, component placement, and grounding. Ensure that the device is properly decoupled and that the power supply is clean.
  • Yes, but consult with onsemi's application engineers to ensure the device can meet the specific requirements of your custom protocol. Additional testing and validation may be required.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

EMI8041MUTAG Overview

Use the download button to access the EMI8041MUTAG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EMI80, or try a keyword search, such as Data Line Filters

Parts related to EMI8041MUTAG

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑