Please enter a minimum 3 letters or numbers
Technical Content
Part Image

EMI8131MUTAG - onsemi

Description: Low Channel Resistance 6.0 ohm; High Common Mode Stop Band Attenuation 30dB at 750MHz; Large Differential Mode Cutoff Frequency f3dB >2.5GHz; Total Insertion Loss DMloss <3.7dB at 2.5GHz

Download EMI8131MUTAG Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
EMI8131MUTAG - onsemi - PCB symbol
click to zoom
PCB Footprints
EMI8131MUTAG - onsemi PCB footprint - Other - Other - EMI8131MUTAG-1
click to zoom
3D Models
EMI8131MUTAG - onsemi - 3D model - Other - EMI8131MUTAG-1
click to zoom

EMI8131MUTAG Details

  • Manufacturer Part Number:

    EMI8131MUTAG

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    XDFN-6

  • Manufacturer Package Code:

    711AV

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8504.50.80.00

  • Manufacturer:

    onsemi

  • YTEOL:

    0

  • Approvals:

    IEC

  • Filter Type:

    DATA LINE FILTER

  • Height:

    0.5 mm

  • JESD-609 Code:

    e4

  • Length:

    1.4 mm

  • Mounting Type:

    SURFACE MOUNT

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Impedance:

    50 OHM Ω

  • Packing Method:

    TR

  • Rated Current:

    0.1 A

  • Rated Voltage:

    3.3 V

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Width:

    1.35 mm

EMI8131MUTAG Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the EMI8131MUTAG close to the antenna and use a short, direct connection to minimize radiation.
  • The EMI8131MUTAG requires a 2.7V to 5.5V power supply. Ensure the voltage regulator is stable and decoupled with a 10uF capacitor. A 1kΩ resistor in series with the bias pin can help stabilize the voltage.
  • The EMI8131MUTAG can tolerate up to 2:1 VSWR (Voltage Standing Wave Ratio) mismatch. However, for optimal performance, it's recommended to match the antenna impedance to 50Ω.
  • Use a spectrum analyzer to measure the transmitted signal. Check the PCB layout, antenna design, and power supply for any issues. Verify the EMI8131MUTAG is properly biased and the antenna is properly matched.
  • The EMI8131MUTAG is rated for operation up to 85°C. However, for reliable operation, it's recommended to keep the junction temperature below 70°C. Use a heat sink or thermal pad if necessary.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

EMI8131MUTAG Overview

Use the download button to access the EMI8131MUTAG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EMI81, or try a keyword search, such as Data Line Filters

Parts related to EMI8131MUTAG

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑