Panasonic recommends a 4-layer PCB with a solid ground plane, and a microstrip line configuration for the input and output lines. A minimum of 10mil clearance between the component and the PCB edge is also recommended.
Panasonic recommends using a reflow soldering process with a peak temperature of 240°C ± 5°C, and a soldering time of 30-60 seconds. A solder paste with a melting point of 217°C ± 5°C is also recommended.
The ERA2ARB2322X can operate reliably from -40°C to 125°C, but the maximum operating temperature range is dependent on the specific application and environmental conditions.
Panasonic recommends using ESD protection devices such as TVS diodes or ESD arrays on the input and output lines to prevent damage from electrostatic discharge.
Panasonic recommends using a 10uF ceramic capacitor and a 100nF ceramic capacitor in parallel, placed as close as possible to the power supply pins of the ERA2ARB2322X.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERA2ARB2322X Overview
Use the download button to access the ERA2ARB2322X schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERA2A,
or try a keyword search, such as Metal Film Resistors
