Description:Thick Film Chip Resistor 0.1W 0603 432R Panasonic E96 Series Precision Thick Film Surface Mount Resistor 0603 Case 432Ω ±1% 0.1W ±100ppm/°C
The recommended land pattern for ERJ3EKF4320V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJ3EKF4320V should be placed on a flat, even surface to prevent warping or deformation. The component should be aligned with the PCB pads and secured with a gentle pressure to ensure proper solder wetting. The recommended reflow temperature profile is 260°C peak temperature with a 3-5°C/s ramp rate.
The maximum power rating for ERJ3EKF4320V is 0.25W. Exceeding this power rating may cause the component to overheat, leading to reduced performance or even failure.
Yes, ERJ3EKF4320V is suitable for high-frequency applications up to 100MHz. However, it's essential to consider the component's self-resonant frequency, which is around 150MHz, and ensure that the operating frequency is below this point to avoid resonance and potential performance issues.
ERJ3EKF4320V has a moisture sensitivity level (MSL) of 2, which means it can withstand normal humidity levels. However, it's recommended to follow proper storage and handling procedures to prevent moisture absorption, especially in high-humidity environments.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJ3EKF4320V Overview
Use the download button to access the ERJ3EKF4320V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJ3E,
or try a keyword search, such as Fixed Resistors
