The recommended land pattern for ERJ3RED1004V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJ3RED1004V should be placed on a flat, even surface to prevent tombstoning. The component should be aligned with the PCB pads and the solder paste should be applied evenly. The recommended reflow profile is 260°C peak temperature, with a dwell time of 30-60 seconds above 220°C.
The ERJ3RED1004V is a general-purpose resistor and is not optimized for high-frequency applications. While it can be used up to a few hundred kHz, it may not provide the best performance in high-frequency circuits. For high-frequency applications, consider using a resistor specifically designed for high-frequency use, such as the ERJ- series from Panasonic.
The ERJ3RED1004V is rated for operation up to 155°C, but its performance may degrade at higher temperatures. If you need to use the resistor in a high-temperature environment, consider using a high-temperature resistor such as the ERJ-H series from Panasonic, which is rated for operation up to 200°C.
To ensure the reliability of the ERJ3RED1004V in a humid environment, consider using a conformal coating or potting compound to protect the component from moisture. Additionally, ensure that the PCB is designed with adequate clearance and creepage distances to prevent moisture from accumulating on the component.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJ3RED1004V Overview
Use the download button to access the ERJ3RED1004V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJ3R,
or try a keyword search, such as Fixed Resistors
