ERJ6BWFR062V footprint, schematic symbol and 3D model by Panasonic

Symbol

PCB Footprints

3D Models

ERJ6BWFR062V Details

The recommended land pattern for ERJ6BWFR062V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJ6BWFR062V should be placed on a flat, even surface to prevent tombstoning. The component should be aligned with the PCB pads and the solder paste should be applied evenly. The recommended reflow temperature profile is 250°C for 10-30 seconds.
The ERJ6BWFR062V is a general-purpose resistor and is not specifically designed for high-frequency applications. However, it can be used up to 100 MHz with minimal signal attenuation. For high-frequency applications above 100 MHz, a specialized high-frequency resistor should be used.
The ERJ6BWFR062V has a maximum operating temperature of 125°C. While it can withstand short-term excursions up to 150°C, prolonged exposure to high temperatures can affect its performance and lifespan. If your application requires operation above 125°C, a high-temperature resistor should be used.
The ERJ6BWFR062V has a power rating of 0.062W. To ensure it meets your application's power rating requirements, calculate the maximum power dissipation required by your circuit and ensure it does not exceed the component's power rating. You can also consider using a higher-power resistor or a resistor array if necessary.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the ERJ6BWFR062V schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like ERJ6B, or try a keyword search, such as Fixed Resistors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →