The recommended land pattern for ERJ6ENF1503V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a minimum clearance of 0.2mm from the component body.
During reflow soldering, the ERJ6ENF1503V should be placed on a flat, even surface to prevent warping or deformation. The component should be aligned with the PCB pads and secured with a gentle pressure to prevent movement during the reflow process. The recommended reflow temperature profile is 250°C for 10-30 seconds.
The maximum power rating for ERJ6ENF1503V is 0.25W. Exceeding this power rating can cause the component to overheat, leading to reduced performance, reliability issues, or even failure.
Yes, ERJ6ENF1503V is suitable for high-frequency applications up to 100MHz. However, it's essential to consider the component's self-resonant frequency, which is around 10MHz, and ensure that the operating frequency is below this point to avoid resonance and potential performance issues.
ERJ6ENF1503V is rated for operation in environments with a relative humidity of up to 80% and temperatures ranging from -55°C to 125°C. However, it's essential to consider the component's moisture sensitivity level (MSL) rating of 2a, which means it can be exposed to humidity for up to 4 days without requiring baking or drying.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJ6ENF1503V Overview
Use the download button to access the ERJ6ENF1503V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJ6E,
or try a keyword search, such as Fixed Resistors
