The recommended land pattern for ERJ6GEYJ162V is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJ6GEYJ162V should be placed on a flat, even surface to prevent tombstoning. The component should be aligned with the PCB pads and the solder paste should be applied evenly. The recommended reflow temperature profile is 250°C for 10-30 seconds.
The ERJ6GEYJ162V is a general-purpose resistor and is not specifically designed for high-frequency applications. However, it can be used up to 100 MHz with minimal signal attenuation. For high-frequency applications above 100 MHz, a specialized high-frequency resistor should be used.
The ERJ6GEYJ162V has a maximum operating temperature of 125°C. While it can tolerate short-term excursions up to 150°C, prolonged exposure to high temperatures can affect its performance and reliability. If your application requires operation above 125°C, a high-temperature resistor should be used.
The ERJ6GEYJ162V has a power rating of 0.25W. To ensure it meets your application's power rating requirements, calculate the maximum power dissipation using the formula P = V^2/R, where V is the voltage across the resistor and R is the resistance value. Ensure the calculated power does not exceed the rated power of 0.25W.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJ6GEYJ162V Overview
Use the download button to access the ERJ6GEYJ162V schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJ6G,
or try a keyword search, such as Fixed Resistors
Suggested Parts
If you searched for ERJ6GEYJ162V, you might also be interested in these parts:
