The recommended land pattern for ERJL14KF39MU is a rectangular pad with a size of 1.3mm x 0.8mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a solder mask clearance of 0.1mm.
During reflow soldering, the ERJL14KF39MU should be placed on a flat, even surface to prevent tombstoning. The component should be aligned with the PCB pads and the solder paste should be applied evenly. The recommended reflow temperature profile is 250°C for 10-30 seconds.
The ERJL14KF39MU is a general-purpose resistor and is not specifically designed for high-frequency applications. However, it can be used up to 100 MHz with minimal signal attenuation. For high-frequency applications above 100 MHz, a specialized high-frequency resistor should be used.
The ERJL14KF39MU has a maximum operating temperature of 150°C. While it can withstand short-term excursions up to 200°C, prolonged exposure to high temperatures can affect its performance and reliability. If your application requires operation above 150°C, a high-temperature resistor should be used.
ERJL14KF39MU components should be stored in a dry, cool place away from direct sunlight and moisture. They should be handled with anti-static precautions, such as using an anti-static wrist strap or mat, to prevent electrostatic discharge (ESD) damage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJL14KF39MU Overview
Use the download button to access the ERJL14KF39MU schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJL1,
or try a keyword search, such as Fixed Resistors
