The recommended land pattern for ERJS140R00U is a rectangular pad with a size of 2.5mm x 1.25mm, with a 0.5mm hole in the center for the resistor's terminal. The pad should be connected to a copper pour with a minimum width of 0.5mm to ensure good thermal dissipation.
While ERJS140R00U is a general-purpose resistor, it is not recommended for high-frequency applications above 100MHz due to its inductive nature. For high-frequency applications, it's recommended to use a resistor with a lower inductance, such as a thin-film resistor or a resistor with a specialized high-frequency design.
ERJS140R00U has a maximum operating temperature of 155°C, but its resistance value may drift by up to 1% at temperatures above 125°C. If your application requires operation at high temperatures, it's recommended to derate the resistor's power rating and consider using a resistor with a higher temperature rating, such as a ceramic or metal-film resistor.
ERJS140R00U is a through-hole resistor and can be susceptible to vibration-induced failure. If your application is subject to high vibrations, it's recommended to use a surface-mount resistor or a resistor with a more secure termination, such as a wire-wound resistor or a resistor with a specialized vibration-resistant design.
ERJS140R00U has a moisture sensitivity level (MSL) of 2, which means it can be exposed to a relative humidity of up to 60% at 30°C for up to 168 hours without damage. However, if your application is subject to high humidity or moisture, it's recommended to use a resistor with a higher MSL rating or a specialized coating to prevent moisture ingress.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ERJS140R00U Overview
Use the download button to access the ERJS140R00U schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ERJS1,
or try a keyword search, such as Fixed Resistors
