Description:Low Capacitance (0.20 pF Typ, I/O to GND); Protection for the Following IEC Standards: IEC 61000−4−2 (Level 4); Low ESD Clamping Voltage; These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant
A good PCB layout for ESD8111PFCT5G involves placing the device close to the connector or interface, using short traces, and minimizing the distance between the device and the protected circuit. A ground plane under the device can also help to reduce parasitic inductance.
The recommended capacitor value for the VCC pin is 1-10uF, depending on the specific application and noise requirements. A larger capacitor value can help to filter out noise, but may increase the device's power-up time.
The maximum operating temperature for the ESD8111PFCT5G is 125°C, as specified in the datasheet. However, it's recommended to derate the device's performance at higher temperatures to ensure reliable operation.
Yes, the ESD8111PFCT5G is suitable for high-speed interfaces like HDMI, USB, and SATA. Its low capacitance and high bandwidth make it an ideal choice for protecting high-speed signals.
To ensure proper soldering, follow the recommended reflow soldering profile, and use a solder paste with a melting point below 260°C. Avoid overheating the device, and use a soldering iron with a temperature-controlled tip.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ESD8111PFCT5G Overview
Use the download button to access the ESD8111PFCT5G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ESD81,
or try a keyword search, such as Transient Suppressors
