The recommended land pattern for ESE13V01C is a rectangular pad with a size of 2.5mm x 1.5mm, with a 0.5mm radius corner and a 0.3mm solder mask clearance.
While the ESE13V01C is rated for operation up to 125°C, it's recommended to derate the voltage and current ratings when operating above 85°C to ensure reliability and prevent thermal runaway.
To prevent damage, handle the ESE13V01C by the tabs or body, avoiding touching the electrical contacts. Use a soldering iron with a temperature of 350°C or less, and avoid applying excessive force or pressure during rework.
The ESR of the ESE13V01C is approximately 0.15 ohms at 100 kHz, but this value may vary depending on the frequency and operating conditions.
While the ESE13V01C is designed to withstand normal vibration, it's recommended to secure the component using a suitable mounting method, such as adhesive or a mechanical clamp, to prevent movement and ensure reliability in high-vibration applications.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ESE13V01C Overview
Use the download button to access the ESE13V01C schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ESE13,
or try a keyword search, such as Snap Acting/Limit Switches
