The recommended PCB layout for optimal thermal performance involves placing thermal vias under the IC, using a solid ground plane, and keeping the thermal path as short as possible. A 4-layer PCB with a dedicated thermal layer is also recommended.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended thermal design guidelines, use a heat sink if necessary, and ensure good airflow around the device. Additionally, consider using a thermistor or thermal sensor to monitor the temperature and implement thermal protection mechanisms.
The recommended input capacitors are low-ESR ceramic capacitors with a value of 10uF to 22uF, and the recommended output capacitors are low-ESR ceramic or electrolytic capacitors with a value of 22uF to 47uF. The capacitor selection should be based on the specific application requirements and operating conditions.
The output voltage of the EUP3458VIR1 can be adjusted by using an external resistor divider network connected to the FB pin. The resistor values should be calculated based on the desired output voltage and the internal reference voltage of the IC.
The maximum input voltage that can be applied to the EUP3458VIR1 is 28V, but it's recommended to operate the device within the specified input voltage range of 7V to 24V for optimal performance and reliability.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EUP3458VIR1 Overview
Use the download button to access the EUP3458VIR1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EUP34,
or try a keyword search, such as Switching Regulator or Controllers
