Panasonic recommends a PCB layout with a solid ground plane, minimal track length, and a decoupling capacitor (e.g., 100nF) close to the VCC pin to reduce noise and ensure stable operation.
To minimize high-frequency noise, use a ferrite bead or a common-mode choke in series with the power supply line, and consider adding a noise filter capacitor (e.g., 10nF) between the VCC and GND pins.
Although the datasheet specifies a maximum input voltage of 5.5V, it's recommended to limit the input voltage to 5V to ensure reliable operation and prevent damage to the device.
While the device is rated for operation up to 85°C, it's essential to consider the derating curve and ensure that the junction temperature (Tj) does not exceed 125°C. Use a thermal management strategy, such as a heat sink or thermal pad, to maintain a safe operating temperature.
To ensure EMC, follow proper PCB design practices, such as using a shielded enclosure, minimizing track length, and adding EMI filters or ferrite beads on the input/output lines. Additionally, consider using a Panasonic-approved EMC filter module.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EVQQ2W03W Overview
Use the download button to access the EVQQ2W03W schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like EVQQ2,
or try a keyword search, such as Keypad Switches
