Panasonic recommends a soldering temperature profile with a peak temperature of 260°C (500°F) for 10-30 seconds, with a ramp-up rate of 2-3°C/s and a ramp-down rate of 3-5°C/s.
Yes, the EZJP0V6R8MA is designed to withstand high vibrations and is suitable for use in applications with vibration levels up to 10G (98m/s²). However, it's recommended to consult Panasonic's vibration test report and perform additional testing to ensure the capacitor meets the specific requirements of your application.
The EZJP0V6R8MA is designed to operate in humid environments and meets the requirements of IEC 60384-4-1, which includes a humidity test at 40°C (104°F) and 90% relative humidity for 56 days. However, it's recommended to take additional precautions to prevent moisture ingress and ensure the capacitor is properly sealed in the application.
The ESR of EZJP0V6R8MA is not explicitly stated in the datasheet, but it can be estimated based on the capacitor's impedance characteristics. According to Panasonic's capacitor selection guide, the ESR of a similar capacitor (EZJP0V6R8MA is around 0.1-0.2 ohms at 100 kHz.
No, the EZJP0V6R8MA is rated for operation up to 125°C (257°F) and should not be used in applications exceeding this temperature. Using the capacitor above its rated temperature can lead to reduced reliability, increased leakage current, and potentially catastrophic failure.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EZJP0V6R8MA Overview
Use the download button to access the EZJP0V6R8MA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EZJP0,
or try a keyword search, such as Non-linear Resistors
