Part Image

FAN4274IMU8X - onsemi

Description: 25 nV / √Hz Input Voltage Noise; FAN4174 Competes with OPA340 and TLV2461; Available in a SOT23-5 Package; FAN4274 Competes with OPA2340 and TLV2462; Available in MSOP-8 Package; 3.7 MHz Bandwidth; Fully Specified at +2.7 V and +5 V Supplies; Output Swing to Within 10 mV of Either Rail; 3 V / µs Slew Rate; Replaces KM4170 and KM4270; 200 µA Supply Current per Amplifier; Input Voltage Range Exceeds the Rails

Download FAN4274IMU8X Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
FAN4274IMU8X - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - 8-Lead Molded Small Outline Package (MSOP)
click to zoom
3D Models
FAN4274IMU8X - onsemi  - 3D model - Small Outline Packages - 8-Lead Molded Small Outline Package (MSOP)
click to zoom

FAN4274IMU8X Details

  • Manufacturer Part Number:

    FAN4274IMU8X

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    Micro8

  • Package Description:

    MSOP-8

  • Manufacturer Package Code:

    846A-02

  • Country Of Origin:

    Mainland China

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Factory Lead Time:

    15 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    7.17

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Common-mode Reject Ratio-Min:

    50 dB

  • Common-mode Reject Ratio-Nom:

    65 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    6000 µV

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Equivalence Code:

    TSSOP8,.19

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TAPE AND REEL

  • Peak Reflow Temperature (Cel):

    240

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Nom:

    3 V/us

  • Supply Current-Max:

    0.6 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    2.7 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    4000

  • Wideband:

    NO

  • Width:

    3 mm

FAN4274IMU8X Frequently Asked Questions (FAQs)

  • A thermal pad is recommended under the package to improve thermal performance. A minimum of 2oz copper thickness and a thermal relief pattern are recommended to ensure good heat dissipation.
  • Ensure that the device is operated within the recommended voltage and current ranges, and that the PCB is designed to minimize thermal gradients. Additionally, consider using a thermal interface material to improve heat transfer between the device and the heat sink.
  • Exceeding the maximum junction temperature can lead to reduced device lifespan, increased thermal resistance, and potentially even device failure. It is essential to ensure that the device operates within the recommended temperature range to maintain reliability.
  • Check the input voltage, output voltage, and current consumption to ensure they are within the recommended ranges. Verify that the device is properly connected and that the PCB layout is correct. If issues persist, consult the datasheet and application notes for troubleshooting guidance.
  • The device is designed to meet CISPR 25 Class 5 emissions standards. To minimize EMI and RFI, ensure proper PCB layout, use a shielded enclosure, and follow good design practices for signal routing and decoupling.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FAN4274IMU8X Overview

Use the download button to access the FAN4274IMU8X schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FAN42, or try a keyword search, such as Operational Amplifiers

Parts related to FAN4274IMU8X

Showing 0 results