Part Image

FAN6300AMY - onsemi

Description: Low Frequency Operation (below 100kHz) for FAN6300A ; High-Voltage Startup ; Quasi-Resonant Operation ; Over Power Compensation ; GATE Output Maximum Voltage ; VDD Pin and Output Voltage (DET Pin) OVP Latched ; Cycle-by-Cycle Current Limiting ; High Frequency Operation (up to 190kHz) for FAN6300H; Leading-Edge Blanking (LEB) ; Peak-Current-Mode Control ; Auto-Recovery Open-Loop Protection (FB Pin) ; Auto-Recovery Over-Current Protection (FB Pin) ; Internal Minimum tOFF ; Internal 5ms Soft-Start

Download FAN6300AMY Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
FAN6300AMY - onsemi PCB footprint - Small Outline Packages - Small Outline Packages - 8-Lead, Small Outline Package (SOP-8)+
click to zoom
3D Models
FAN6300AMY - onsemi  - 3D model - Small Outline Packages - 8-Lead, Small Outline Package (SOP-8)+
click to zoom

FAN6300AMY Details

  • Manufacturer Part Number:

    FAN6300AMY

  • Brand Name:

    onsemi

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC-8

  • Package Description:

    SOP-8

  • Manufacturer Package Code:

    751EB

  • Country Of Origin:

    Philippines

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    14 Weeks

  • Manufacturer:

    onsemi

  • YTEOL:

    6.7

  • Additional Feature:

    ALSO HAS CONTROL TECHNIQUE OF RESONANT

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    RESONANT CONTROL

  • Input Voltage-Max:

    25 V

  • Input Voltage-Min:

    10 V

  • Input Voltage-Nom:

    15 V

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max (Isup):

    5.5 mA

  • Supply Voltage-Nom (Vsup):

    12 V

  • Surface Mount:

    YES

  • Switcher Configuration:

    BUCK-BOOST

  • Switching Frequency-Max:

    100 kHz

  • Technology:

    BICMOS

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

FAN6300AMY Frequently Asked Questions (FAQs)

  • A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the thermal path short and use a thermal pad on the bottom of the IC.
  • Follow the power-up sequence outlined in the datasheet. Ensure VCC is applied before EN, and EN is high before VOUT is enabled. Also, configure the device according to the application note and datasheet recommendations.
  • Choose a capacitor with low ESR, high ripple current rating, and a voltage rating above the maximum output voltage. Ensure the capacitor is placed close to the IC and connected with short, low-inductance traces.
  • Use a low-ESR input capacitor, keep the input and output traces short and away from noise sources, and add a ferrite bead or common-mode choke to the input if necessary. Also, ensure good PCB layout and grounding practices.
  • Keep the device away from heat sources, use a heat sink or thermal pad if necessary, and ensure good airflow around the device. Also, consider the thermal resistance of the PCB and the device's thermal shutdown feature.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FAN6300AMY Overview

Use the download button to access the FAN6300AMY schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FAN63, or try a keyword search, such as Switching Regulator or Controllers

Parts related to FAN6300AMY

Showing 0 results

FAN6300AMY Alternates

Showing results

Image Part Number Model
Part Image FAN6300SY onsemi

Switching Controller, Current-mode, PDSO8