A 2-layer or 4-layer PCB with a solid ground plane and thermal vias under the IC is recommended. Keep the thermal path short and use a thermal pad on the bottom of the IC.
Ensure good thermal design, use a heat sink if necessary, and follow the recommended operating conditions. Monitor the junction temperature (TJ) and adjust the design accordingly.
The maximum allowed voltage on the input pins is 6V, exceeding this may cause damage to the device.
Yes, the FAN7080MX-GF085 is suitable for high-frequency switching applications up to 1MHz. However, ensure proper PCB layout and decoupling to minimize EMI and noise.
Use a voltage regulator or a TVS diode to protect against overvoltage. Implement overcurrent protection using a fuse or a current-sensing resistor.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FAN7080MX_GF085 Overview
Use the download button to access the FAN7080MX_GF085 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FAN70,
or try a keyword search, such as MOSFET Drivers