Description:Low Start-up and Operating Current: 120 µA, 3.2 mA; Internal Clamping Zener Diode; High Accuracy Oscillator; Under-Voltage Lockout with 1.8 V of Hysteresis; Internal Active ZVS Control; Floating Channel Designed for Bootstrap Operation to +600 V; Soft-Start Functionality; Adjustable Run Frequency and Preheat Time; Internal Protection Function (Latch Mode)
A good PCB layout for the FAN7711MX should include a solid ground plane, separate analog and digital grounds, and a decoupling capacitor (e.g., 10uF) between VIN and GND. Additionally, keep the input and output capacitors close to the IC and use short, wide traces for the high-current paths.
Choose input capacitors with low ESR (Equivalent Series Resistance) and high ripple current rating. For output capacitors, select ones with low ESR, high capacitance, and a voltage rating that exceeds the output voltage. A good starting point is a 10uF input capacitor and a 22uF output capacitor.
The FAN7711MX is rated for operation from -40°C to 125°C (TJ) and -40°C to 85°C (TA) ambient temperature range. However, the device's performance and reliability may degrade at extreme temperatures, so it's essential to consider thermal management in your design.
To ensure stability, follow the recommended PCB layout, use a sufficient output capacitor, and add a small ceramic capacitor (e.g., 10nF) between the FB pin and GND. Additionally, avoid long feedback traces and keep the feedback loop as short as possible.
The FAN7711MX can deliver up to 1.5A of output current. However, the actual output current capability depends on the input voltage, output voltage, and thermal conditions. Be sure to check the device's thermal performance and adjust the output current accordingly.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FAN7711MX Overview
Use the download button to access the FAN7711MX schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like FAN77,
or try a keyword search, such as Display Drivers
