FC4SDCBMF20.0-T1 footprint, schematic symbol and 3D model by ABRACON

Symbol

PCB Footprints

3D Models

FC4SDCBMF20.0-T1 Details

Abracon recommends a symmetrical PCB layout with a ground plane underneath the device to minimize noise and ensure optimal performance. A recommended layout is available in the Abracon application note AN-04.
The FC4SDCBMF20.0-T1 requires a CMOS-compatible input signal with a minimum drive level of 50% VCC. Ensure the input signal has a rise and fall time of less than 10 ns and a maximum frequency deviation of ±50 ppm.
The FC4SDCBMF20.0-T1 operates over a temperature range of -40°C to +85°C, with a maximum frequency deviation of ±100 ppm over the entire range.
Yes, the FC4SDCBMF20.0-T1 is designed to withstand high-vibration environments, with a vibration sensitivity of 10 g peak acceleration over a frequency range of 10 Hz to 2 kHz.
The FC4SDCBMF20.0-T1 has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and ensure the device is stored in an ESD-protective package.

Community Provided

System Verified

Community Approved

Use the download button to access the FC4SDCBMF20.0-T1 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FC4SD, or try a keyword search, such as Quartz Crystals

Showing 0 results

Image	Part Number	Model
	FC4SDCBMF20.0 Abracon Corporation Parallel - Fundamental Quartz Crystal, 20MHz Nom
	FC4SDCBMM20.0-T1 Fox Electronics Parallel - Fundamental Quartz Crystal, 20MHz Nom
	FOXSD/200-20 Fox Electronics Parallel - Fundamental Quartz Crystal, 20MHz Nom
	FOXSDLF/200R-20 Fox Electronics Parallel - Fundamental Quartz Crystal, 20MHz Nom
	FOXSDLF/200R-20-T1 Fox Electronics Parallel - Fundamental Quartz Crystal, 20MHz Nom
For a full list of alternate parts for FC4SDCBMF20.0-T1, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →