Part Image

FM24V01A-G - Infineon

Description: F-RAM F-RAM Memory Serial

Download FM24V01A-G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
FM24V01A-G - Infineon PCB footprint - Small Outline Packages - Small Outline Packages - 8-pin SOIC_
click to zoom
3D Models
FM24V01A-G - Infineon  - 3D model - Small Outline Packages - 8-pin SOIC_
click to zoom

FM24V01A-G Details

  • Manufacturer Part Number:

    FM24V01A-G

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Factory Lead Time:

    8 Weeks

  • Manufacturer:

    Infineon Technologies AG

  • YTEOL:

    8

  • Additional Feature:

    ALSO OPERATES 1 MHZ :2KV ESD AVAILABLE

  • Clock Frequency-Max (fCLK):

    3.4 MHz

  • Data Retention Time-Min:

    10

  • Endurance:

    100000000000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.889 mm

  • Memory Density:

    131072 bit

  • Memory IC Type:

    FRAM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    16384 words

  • Number of Words Code:

    16000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    16KX8

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    1.727 mm

  • Serial Bus Type:

    I2C

  • Standby Current-Max:

    0.00015 A

  • Standby Voltage-Min:

    2 V

  • Supply Current-Max:

    0.001 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.8985 mm

  • Write Protection:

    HARDWARE

FM24V01A-G Frequently Asked Questions (FAQs)

  • The recommended operating voltage range for the FM24V01A-G is 1.7V to 3.6V.
  • To ensure data integrity, it is recommended to use a voltage supervisor or a power-on reset circuit to ensure that the device is fully powered up before accessing the memory. Additionally, use a capacitor to filter out any noise on the power supply lines.
  • The FM24V01A-G supports up to 1 million write cycles.
  • The FM24V01A-G uses a page-based write architecture. Each page consists of 8 bytes. To perform a page write, send a write command followed by the page address and the 8 bytes of data. For block writes, send a block write command followed by the starting address and the number of bytes to be written.
  • The WP pin is used to enable or disable write protection for the entire memory array. When the WP pin is tied low, the entire memory array is write-protected. When the WP pin is tied high, the memory array is writable.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

FM24V01A-G Overview

Use the download button to access the FM24V01A-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FM24V, or try a keyword search, such as FRAMs

Parts related to FM24V01A-G

Showing 0 results