Please enter a minimum 3 letters or numbers
Technical Content
Part Image

FM25VN10-GTR - Infineon

Description: F-RAM 1M (128Kx8) 2.0-3.6V F-RAM

Download FM25VN10-GTR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
FM25VN10-GTR - Infineon - PCB symbol
click to zoom
PCB Footprints
FM25VN10-GTR - Infineon PCB footprint - Small Outline Packages - Small Outline Packages - 8-PIN SOIC (150 mils) 51-85066
click to zoom
3D Models
FM25VN10-GTR - Infineon - 3D model - Small Outline Packages - 8-PIN SOIC (150 mils) 51-85066
click to zoom

FM25VN10-GTR Details

  • Manufacturer Part Number:

    FM25VN10-GTR

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Factory Lead Time:

    10 Weeks

  • Manufacturer:

    Infineon Technologies AG

  • YTEOL:

    8

  • Additional Feature:

    ALSO OPERATES AT 25MHZ FROM 2.0-2.7V SUPPLY AND 4KV ESD AVAILABLE

  • Clock Frequency-Max (fCLK):

    40 MHz

  • Data Retention Time-Min:

    10

  • Endurance:

    100000000000000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.889 mm

  • Memory Density:

    1048576 bit

  • Memory IC Type:

    FRAM

  • Memory Width:

    8

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Words:

    131072 words

  • Number of Words Code:

    128000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    128KX8

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    1.727 mm

  • Serial Bus Type:

    SPI

  • Standby Current-Max:

    0.00015 A

  • Standby Voltage-Min:

    2.7 V

  • Supply Current-Max:

    0.003 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Terminal Finish:

    Pure Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.8985 mm

  • Write Protection:

    HARDWARE/SOFTWARE

FM25VN10-GTR Frequently Asked Questions (FAQs)

  • Infineon provides a recommended PCB layout in their application note AN2013-01, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize electromagnetic interference (EMI).
  • The FM25VN10-GTR requires a specific power-up sequence to ensure proper initialization. The device should be powered up with a stable VCC supply, followed by a reset pulse on the RST pin. The device is then ready to receive commands. Refer to the datasheet for the recommended power-up sequence and timing diagrams.
  • The FM25VN10-GTR has a maximum operating frequency of 10 MHz, as specified in the datasheet. However, the actual operating frequency may be limited by the system design and the quality of the clock signal. It is recommended to consult the datasheet and application notes for guidance on clock signal quality and frequency planning.
  • The FM25VN10-GTR provides error detection and correction mechanisms, such as cyclic redundancy checks (CRC) and error flags. The device also has a built-in watchdog timer to detect and recover from system failures. Engineers should implement error handling routines in their firmware to detect and respond to errors, and consult the datasheet and application notes for guidance on error handling and recovery.
  • The FM25VN10-GTR is specified to operate over an industrial temperature range of -40°C to +85°C. However, the device may require additional thermal management and design considerations to ensure reliable operation in extreme temperature environments. Engineers should consult the datasheet and application notes for guidance on thermal management and design considerations.

Trust Checks

This model has been verified by system checks.
System Verified
Sponsored

FM25VN10-GTR Overview

Use the download button to access the FM25VN10-GTR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FM25V, or try a keyword search, such as FRAMs

Parts related to FM25VN10-GTR

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

FM25VN10-GTR Alternates

Showing results

Image Part Number Model
Part Image FM25VN10-G Cypress Semiconductor

FRAM, 128KX8, Serial, SPI, PDSO8