A good PCB layout for FMMV2103TA involves keeping the input and output traces short and separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 10uF capacitor between VIN and GND, and a 1uF capacitor between VOUT and GND.
To ensure the stability of the output voltage, it's essential to use a suitable output capacitor with a low ESR (Equivalent Series Resistance) and a high ripple current rating. A 10uF to 22uF ceramic capacitor with an X5R or X7R dielectric is recommended. Additionally, the output voltage can be stabilized by adding a feedback resistor (RFB) between VOUT and ADJ pins.
Although the datasheet specifies a maximum input voltage of 26V, it's recommended to limit the input voltage to 24V to ensure reliable operation and to prevent damage to the device. Exceeding the maximum input voltage can lead to reduced performance, increased power dissipation, and potentially damage the device.
FMMV2103TA is rated for operation up to 125°C, but its performance and reliability may degrade at high temperatures. It's essential to consider the device's power dissipation, thermal resistance, and junction temperature when operating in high-temperature environments. A heat sink or thermal management system may be necessary to ensure reliable operation.
The power dissipation of FMMV2103TA can be calculated using the formula: Pd = (VIN - VOUT) x IOUT + VIN x IQ, where IQ is the quiescent current. It's essential to consider the device's power dissipation to ensure reliable operation and to prevent overheating.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
FMMV2103TA Overview
Use the download button to access the FMMV2103TA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FMMV2,
or try a keyword search, such as Varactors
