FOX924B-12.000 footprint, schematic symbol and 3D model by Fox

Symbol

PCB Footprints

3D Models

FOX924B-12.000 Details

A good PCB layout for the FOX924B-12.000 involves keeping the input and output traces short and separate, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
Proper cooling of the FOX924B-12.000 can be achieved by providing adequate airflow, using a heat sink with a thermal conductivity of at least 1 W/m-K, and ensuring the device is mounted on a PCB with a thermal via array. A maximum junction temperature of 125°C should not be exceeded.
To ensure reliable operation, it is recommended to use a low-pass filter or a ferrite bead in series with the input power line to reduce noise and ripple. A 10uF decoupling capacitor should also be placed close to the device.
Yes, the FOX924B-12.000 can be used in a redundant or backup system. However, it is essential to ensure that the devices are properly synchronized and that the system is designed to handle the switchover between the primary and backup oscillators.
The typical start-up time for the FOX924B-12.000 is around 10ms, but this can vary depending on the specific application and PCB layout. It is recommended to consult the datasheet and application notes for more information.

Community Provided

System Verified

Community Approved

Use the download button to access the FOX924B-12.000 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FOX92, or try a keyword search, such as TCXO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →