FOXSDLF/060-20 - Fox

FOXSDLF/060-20 Frequently Asked Questions (FAQs)

• What is the recommended power supply decoupling for the FOXSDLF/060-20?
  Fox Electronics recommends using a 10uF to 22uF decoupling capacitor between the VCC pin and GND, placed as close to the oscillator as possible, to ensure stable operation.
• How do I ensure the FOXSDLF/060-20 oscillator starts up reliably?
  To ensure reliable startup, Fox Electronics recommends applying power to the VCC pin slowly, with a rise time of at least 1ms, and ensuring that the voltage reaches the minimum operating voltage (1.8V) before the oscillator is enabled.
• What is the maximum load capacitance for the FOXSDLF/060-20?
  The FOXSDLF/060-20 can drive a maximum load capacitance of 15pF. Exceeding this limit may affect the oscillator's frequency stability and amplitude.
• Can I use the FOXSDLF/060-20 in a noisy environment?
  While the FOXSDLF/060-20 has some inherent noise immunity, it's still important to take precautions in noisy environments. Use proper PCB layout techniques, such as separating analog and digital grounds, and consider adding noise filtering or shielding if necessary.
• How do I adjust the frequency of the FOXSDLF/060-20?
  The FOXSDLF/060-20 frequency is fixed and cannot be adjusted. If a different frequency is required, consider using a different oscillator model or a programmable oscillator.