A symmetrical, compact layout with minimal trace lengths and a solid ground plane is recommended. Avoid routing signals near the oscillator's output to minimize noise coupling.
Ensure a clean power supply, add a 10-100nF decoupling capacitor near the VCC pin, and use a pull-up resistor (1kΩ-10kΩ) on the EN pin to prevent unwanted startup.
The FOXSLF/120-20 has a typical frequency deviation of ±100 ppm over the operating temperature range (-40°C to 85°C).
Yes, the FOXSLF/120-20 is designed to operate in high-vibration environments. However, ensure proper PCB mounting and consider adding mechanical dampening to minimize vibration-induced frequency shifts.
The output frequency can be adjusted by connecting a resistor (R1) between the FREQ_ADJ pin and GND. The recommended value for R1 is between 1kΩ and 10kΩ.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FOXSLF/120-20 Overview
Use the download button to access the FOXSLF/120-20 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FOXSL,
or try a keyword search, such as Quartz Crystals
